Configure the Climkit Gateway

1. Flash the disk image on the SD card

Download Etcher on https://www.balena.io/etcher/ for Mac or Windows. You can also use ApplePiBaker on Mac.

Insert the SD card in your computer.

Open Etcher and select the disk image: "ckt_mod_v2_4_1.img"

Select the inserted SD card disk as the target and click on Flash.

2. Upload the installation config file

On the Climkit App portal, go to the installation --> Configuration --> Gateway.

Download Config File named "config.json".

Insert the newly flashed SD card in the gateway.

Connect the ethernet port to your local router and connect the gateway to its power supply.

Wait 1 minute and connect to the local config server on http://climkit.local:8080/ with your computer.

Log in with

username: "config" 
Password: "climkit"

Go to Upload config --> Choose the "config.json" file and click on UPLOAD.

Once the configuration is over, restart the gateway and wait 3-5 minutes.

You can now connect to the local config server with link on: Configuration --> Gateway --> Local config server.

Username: "config"
Password: The installation's own "Config Server password"

You can also access the installation remotely with the "Remote config server" link.

Note that it may take up to 5 minutes for the connection to be available.