Electric Bike (eBike) Charging

Nicolas Vodoz Updated by Nicolas Vodoz

1. How to recharge your electric bike?

  1. Connect the charger of your bike to one of the available electrical outlets.
  2. To start a session, swipe your RFID badge on the keyboard, enter the number of the outlet you wish to activate, then press the ENTER key. The power to the outlet will be activated after a few seconds. When you have finished and removed your laundry from the machine, swipe your badge on the keyboard again, enter the machine number to trigger, and press ENTER. If the machine has turned off automatically, repeat the operation at point 1 to unlock the door.
  3. To close the session, swipe your badge on the keyboard again, enter the number of the outlet, and press ENTER. Note that the session will automatically close one hour after the end of the charge.

2. Request a badge

You can request an RFID badge at any time by writing to service@climkit.io.

In case of loss, please send the information to the same address so that the lost badge can be deactivated.

How Did We Do?

Building Laundry Room

Contact