Add OCPP Remote Charging Station

This article describes the configuration of an OCPP Remote charging station on the Climkit platform.

For connection planning, or for on-site equipment installation, refer to the links at the end of the article.

Register an OCPP Remote Charging Station

When no Climkit Gateway is installed, a charging station can be connected directly to the portal via the remote OCPP server.

This configuration is mandatory for Easee or Zaptec charging stations, which cannot be locally connected to a Climkit Gateway.

This configuration allows:

  • user authentication via RFID badge
  • consumption billing

It does not allow Dynamic Load Management (DLM), which strictly requires a Climkit Gateway.

Charging Station Configuration

Enter the Climkit Remote OCPP server URL in the charging station settings:

ws://ocpp.climkit.io:9000

For Easee, simply select Climkit as the operator.

Adding the Charging Station to the Platform

  1. Create a Gateway of type ocpp-remote
  2. Create the charging station by entering its OCPP identifier
  3. Link the charging station to the ocpp-remote Gateway
  4. Repeat operations 2 and 3 for other charging stations.

Connection diagram for electric vehicle charging stations
On-site installation of charging stations

How Did We Do?

Adding charging stations

Add the 4-relay I/O module

Contact