Adding the Climkit Gateway

This article describes the configuration of a Climkit Gateway on the Climkit platform.

For connection planning or for on-site equipment installation, please refer to the links at the end of the article.

Climkit Gateway Registration

All Climkit Gateways are delivered pre-configured.

Do not confuse with Cloud Gateways which are automatically added to the site during the addition of a router.

The operation can be performed before or after the equipment installation.

  1. Log in to app.climkit.io and open the corresponding site. If necessary, create a new site.
  2. Navigate to EQUIPMENT > Communication > Gateways. Click the "+" to add a new Gateway.
  3. Enter the Gateway's serial number (SN) and MAC address (MAC ADDRESS) in the form, then click Save.
  4. Do not enable the "Create new Gateway" setting if the label with the serial number and MAC address is affixed to the Gateway. The numbers are shown on the packaging and on the equipment. It is also possible to obtain them by scanning the QR code.
    Example with SN: 23180015 and MAC B8:27:EB:BA:B8:FF:

Climkit Gateway connection diagram to other equipment
On-site installation of the Gateway

How Did We Do?

Add the router (4G or LAN)

Adding electricity meters

Contact