Installation and connection
Installing a 4G Router
This article describes the on-site installation of the 4G Router. Configuration on the Climkit platform is also required for the equipment to function. Links are available at the end of the document.…
Install a LAN router
This article describes the on-site installation of the LAN router. Configuration on the Climkit platform is also required for the equipment to function. Links are available at the end of the document…
Installing the Climkit Gateway
This article describes the on-site installation of the Gateway. For the equipment to function, configuration on the Climkit platform is also required. Links are provided at the end of the document. C…
Install the RS485-Ethernet converter
This article describes the on-site installation of the RS485-Ethernet converter. Unlike other equipment, this device does not need to be registered on the Climkit platform. RS485-Ethernet Converter I…
Install the M-Bus converter
M-Bus Converter Installation. Connect the 24V AC/DC power cable to the + and - terminals of the device. Connect the device's RS485 GND, TxD, and RxD ports to the Climkit Gateway's RS485 port accordin…
Install a PoE switch
This article describes the on-site installation of a PoE switch. Unlike other equipment, this device does not need to be registered on the Climkit platform. PoE Switch Installation. Install the PoE s…
Install Wi-Fi access points
This article describes the on-site installation of Wi-Fi access points. Unlike other equipment, these devices do not need to be registered on the Climkit platform. Wi-Fi Access Point Installation. Di…
Install electricity meters
This article describes the on-site installation of electricity meters. Configuration on the Climkit platform is also required for the equipment to function. Links are available at the end of this doc…
Installing charging stations
This article describes the on-site installation of electric vehicle charging stations. Configuration on the Climkit platform is also necessary for these devices to function. Links are provided at the…
Installing heat and water meters
This article describes the on-site installation of heat and water meters. For the equipment to function, configuration on the Climkit platform is also required, which is usually performed by our team…
Installing an RFID badge reader
This article describes the on-site installation of RFID readers. For the equipment to function, configuration on the Climkit platform is also required. Links are available at the end of the document.…
Install a three-phase relay meter
This article describes the on-site installation of a three-phase relay meter. For the equipment to function, configuration on the Climkit platform is also required. Links are provided at the end of t…
Installing a Shelly relay meter
This article describes the on-site installation of a Shelly I/O module. Configuration on the Climkit platform is also required for the equipment to function. Links are provided at the end of the docu…
Install the 4-relay I/O module
This article describes the on-site installation of the I/O module. Configuration on the Climkit platform is also required for the equipment to function. Links are available at the end of the document…
