4G Router

Nicolas Vodoz Updated by Nicolas Vodoz

4G Router

The 4G router is required when no internet connection is available in the building. It enables communication between the devices and the Climkit online portal via an inexpensive 4G subscription.

The router is supplied with a DIN rail mount and its 24V DC power supply, a 3m remote antenna, and an activated SIM card.

The device used is a Teltonika TRB140 (or equivalent).

It is also used in Cloud Gateway mode for reading electricity meters.

If the 4G signal is too weak or absent, order an antenna extension cable (5m or 10m) or move the router to an area with a signal. It is not recommended to extend the antenna by more than 20m.

If necessary, an outdoor IP65 antenna is supplied for installation on the facade or in a light well.

Connection

Once started, four LEDs indicate the 4G signal strength. If no signal is received, the LEDs flash. They must indicate a minimum of 4G and 2 bars:

Configuration and commissioning

See Commissioning -> Add a router to a site

How Did We Do?

Contact