Add the router (4G or LAN)

This article describes the configuration of a router (4G or LAN) on the Climkit platform.

For connection planning or device installation on site, please refer to the links at the end of this article.

Registration of a router (4G or LAN) on the Climkit platform

All routers delivered by Climkit are preconfigured.

4G routers are delivered with an active SIM card.

This operation can be performed before or after installing the device.

  1. Log in to app.climkit.io and open the corresponding site. If necessary, create a new site.
  2. Navigate to EQUIPMENT > Communication > Routers. Click on the "+" to add a new router.
  3. Enter the router's SERIAL number and LAN MAC address in the form, then click Save.
    The numbers are displayed on the packaging and on the device. They can also be obtained via the QR code.

Cloud Gateway (MQTT) Configuration

When a router is added to a site, a virtual Cloud Gateway is automatically created under the "Gateways" tab.

If electricity meters need to be read via the Cloud Gateway, simply add the meters directly to it.

Otherwise, if you plan to use a Climkit Gateway, please refer to the procedure Adding the Climkit Gateway to the platform.

Wiring diagram of the router to the Climkit Gateway
On-site installation of a 4G router
On-site installation of a LAN router

How Did We Do?

Creating a new site

Adding the Climkit Gateway

Contact