Add a router to a site

Nicolas Updated by Nicolas

4G router and LAN router

All routers delivered by Climkit are preconfigured. 4G routers come with an active SIM card.

Here's how to associate a router with a site. This can be done before or after installation and connection of the device.

  1. Log in to and open the corresponding site. If necessary, create a new site.
  2. Go to Configuration > Matériel > Routers . Click on the “ + ” to add a new router.
  3. Enter the router's SERIAL number and LAN MAC MAC number in the form and click Save.
    The numbers are displayed on the packaging and on the device. It is also possible to obtain them via the QR code.

Cloud Gateway Configuration (MQTT)

All routers delivered are preconfigured as Cloud Gateway, even if it is not planned to use this functionality.

When the router is added to a site, a Cloud Gateway (MQTT) is also automatically added. See under Configuration > Hardware.

Then simply add the meters to this gateway.

How Did We Do?

Getting started guide to commissioning

Add a Gateway Climkit to a site